Maintenance And Repairs; Disposal - Stihl BT 45 Manual De Instrucciones

English
Ignition System
Electronic magneto ignition
Spark plug (resistor Bosch WSR 6 F,
type): NGK BPMR 7 A
Electrode gap: 0.02 in (0.5 mm)
Fuel System
All position diaphragm carburetor with
integral fuel pump
Fuel tank capacity: 8.5 fl.oz (0.25 l)
Gearbox
Three-stage spur gear drive
Gearbox setting Max. spindle
speed
1 910 rpm
2 2710 rpm
R 810 rpm
Weight
Dry, without auger
10.6 lbs (4.8 kg)
Dimensions
without attachment and chuck
Length: 9.25 in (235 mm)
Width: 9.25 in (235 mm)
Height: 17.32 in (440 mm)
30

Maintenance and Repairs

Users of this unit should carry out only
the maintenance operations described
in this manual. STIHL recommends that
other repair work be performed only by
authorized STIHL servicing dealers
using genuine STIHL replacement parts.
Genuine STIHL parts can be identified
by the STIHL part number, the
{ logo and, in some cases, by
the STIHL parts symbol K. The
symbol may appear alone on small
parts.
For repairs of any component of this
unit's air emissions control system,
please refer to the air emissions
systems warranty in this manual.

Disposal

Observe all country-specific waste
disposal rules and regulations.
STIHL products must not be thrown in
the garbage can. Take the product,
accessories and packaging to an
approved disposal site for environment-
friendly recycling.
Contact your STIHL servicing dealer for
the latest information on waste disposal.
BT 45