Technical Data; Box Contents; Assembly - Greencut EB850XB Manual De Instrucciones

TECHNICAL DATA

Engine
Displacement
Power output
Fuel type
Fuel capacity
Type of oil
Fuel/oil ratio
Ignition system
Air velocity
Air volume
Sound power level
Weight
NOTE: GREENCUT reserves the right to modify the technical characteristics without prior notice.

BOX CONTENTS

-
Blower
-
Blower tubes (x3)
-
Flexible tube
• Remove the product and accessories from the box. Make sure all items are present.
• Inspect the product to ensure that it has not been broken or damaged in transit.
• Do not discard the packaging material until you have carefully inspected and satisfactorily used the product.
ATTENTION: If any part is missing or damaged, contact the Official Technical Service. Do not use
this product without having replaced the missing or damaged part. Using this product with
damaged or missing parts can cause serious injury to the operator.

ASSEMBLY

1. Connect the three tubes of the blower. To connect the blower tubes, the tube (B) must be inserted into the
tube (A) in such a way that it fits perfectly into the tube (i) as shown in the drawing. Once this is done, rotate
the tube (A) following the notches until the anchor reaches its stop. Repeat with tubes (B) and (C).
A
EB850XB
2-stroke petrol
85cc
5,4cv / 6.500rpm
Lead-free 95
1,5L
10W30 / 10W40 / 15W30 / 15W40
25:1
EASY-START manual
414km/h
25,2m /minute
3
101dB(A)
9Kg
-
Mixing pot
-
Instruction manual
B
47
C
EN