Whispbar K918W Instrucciones De Montaje página 7

EN
Fitting Kit
K918W
Make sure the pad fits into the holes
underneath the foot.
Fitment
Clamps directly to edge of roof under the
doors
Please check the front of this manual for
information relating specifically to your
vehicle.
Place crossbar on vehicle. Minimum
recommended spacing between the bars is
700mm (27 1/2") (unless otherwise stated).
It is important to put the clamps in the
correct position on the vehicle.
Letters refer to the part numbers stamped
on clamps.
Clamp Part Number:
A = A793
B = C646
7