Presetting Stations Manually; Presetting Stations Automatically; Tuning To Preset Stations; Cd/Mp3/Wma/Aac - Alpine CDE-9874 Manual De Instrucciones

Presetting Stations Manually

1
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
2
Press and hold, for at least 2 seconds, any one of the
preset buttons (1 through 6) into which you wish
to store the station.
The selected station is stored.
The display shows the band, preset number and station
frequency memorized.
• A total of 18 stations can be stored in the preset memory (6 stations
for each band; FM1, FM2 and AM).
• If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.

Presetting Stations Automatically

1
Press BAND repeatedly until the desired radio band
is displayed.
2
Press and hold TUNE/A.ME for at least 2 seconds.
The frequency on the display continues to change while the
automatic memory is in progress. The tuner will
automatically seek and store 6 strong stations in the
selected band. They will be stored into preset buttons 1 to 6
in order of signal strength.
When the automatic memory has been completed, the tuner
goes to the station stored in preset location No.1.
• If no stations are stored, the tuner will return to the original station
you were listening to before the auto memory procedure began.

Tuning to Preset Stations

1
Press BAND repeatedly until the desired band is
displayed.
2
Press any one of the station preset buttons
(1 through 6) that has your desired radio station in
memory.
The display shows the band, preset number and frequency
of the station selected.
8
-EN

CD/MP3/WMA/AAC

CDE-9874
/ESC
/ /ENT
SOURCE/
/MUTE
Rotary encoder
CDE-9872
/ESC
/ /ENT
SOURCE/
/AUDIO

Playback

The following table shows which discs can be played on which
models.
CD CD-TEXT
CDE-9874
CDE-9872
1
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically, and the
"DISC IN" indicator lights up .
When a disc is already inserted, press SOURCE/
switch to the DISC mode.
The mode will change every time the button is pressed.
TUNER DISC AUX*
TUNER
1
* CDE-9874 only. Refer to "Using the AUX Input Terminal
(CDE-9874 only)" (page 15).
2
* Displayed only when the iPod is connected and AUX+ SETUP is set
to OFF, refer to "Setting the AUX+ SETUP Mode" (page 17).
1 2
4 5 VIEW
1
2 4 5
VIEW
MP3 WMA
1 2 3
iPod* /AUX+* BT AUDIO*
AAC
to
4