Before Operating Your Television; Antenna Connections - Sharp 14MR10 Manual De Operación

Before Operating Your Television

Location
• For normal operation, your TV should be located in an area of the room where cool adequate ventilation
is provided. Do not place the back of the television set in a place where free airflow will be restricted.
• Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys using
magnets or any other magnetic substance, such as iron are kept well away from the TV set.
Power
Your TV operates on 120 Volts, 60 Hz (normal household current).
Note:
• If the set will not be used for a long period, such as during a vacation, unplug the set from the wall
outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the
POWER BUTTON in the OFF position.)
• Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located near
the TV and both radio and TV broadcasts are being received. Should such noise appear, turn off
either the TV or the radio.
• If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received
due to interference from the TV.
L Before using the television, prepare the Remote Control
To use the remote control, insert batteries first.
Insert the batteries
• With your thumb nail, pull up the slit as indicated by the arrow to remove the back cover. Insert two
batteries (size "AA"). Be sure to match the battery e/d terminals with the e/d marks inside the
compartment.

Antenna Connections

Antennas
• The antenna requirements for good color television reception are more important than those for
black & white television reception. For this reason, a good quality outdoor antenna is strongly
recommended.
INDOOR ANTENNA CONNECTION
• The first thing to do after unpacking your TV set is to plug the "telescopic dipole" antenna into the set
as shown in the illustration. Push the antenna as far as it will go into the socket until it snaps into
position. (Should you want to remove the antenna, pull it up.)
• Connect the indoor antenna cable to the COAXIAL CABLE CONNECTOR on the rear of the TV set.
01-07 14MR10 [E].p65e
Pull up
B a t t e r y
Cover
5
COAXIAL CABLE
CONNECTOR
9/5/01, 7:11 PM
5