Publicidad
Idiomas disponibles
Idiomas disponibles
5. ATTACH REAR LIFT LINKS (C) - Lift
rear corner of mower and position
slot in link assembly over pin on rear
mower bracket (D) and secure with
washer and retainer spring,
6. Repeat on opposite side of tractor.
10. Hook end of clutch cable spring (Q)
into hole in idler arm (R).
11. Install belt onto engine clutch pulley
(M).
IMPORTANT:
Check belt for proper rout-
ing in all mower pulley grooves.
12. Raise attachment
lift lever to highest
position.
13. If necessary, adjust gauge wheels
before operating mower as shown in
the Operation section of this manual.
7.
ATTACH
FRONT
LINK (E) - Work from
left side of tractor.
Insert
rod end of link
assembly
through
front hole in tractor
front suspension
bracket
(F).
8.
Insert
end of link (E) into hole in front
mower
bracket
(H) and secure
with
washer
and retainer
spring
(J).
9.
Push clutch
cable
housing
guide
(P)
into bracket,
slide collar
(L) onto guide
and secure
with retainer
spring
(K).
Publicidad
