Publicidad
Idiomas disponibles
Idiomas disponibles
ENGINE
Maintenance,
repair, or replacement
of
the emission
control devices and systems,
which are being done at the customers
ex-
pense, may be performed by any non-road
engine repair establishment
or individual.
Warranty repairs must be performed by an
authorized
engine manufacturer's
service
outlet.
TO ADJUST
THROTTLE
CONTROL
CABLE
The throttle
control
has been preset
at the
factory
and adjustment
should
not be nec-
essary.
Check
adjustment
as described
below
before
loosening
cable.
If adjust-
ment is necessary,
proceed
as follows:
1. With engine
not running,
move throttle
control
lever
to fast position.
2.
Check
that swivel
is against
stop.
If it is
not, loosen
cable
clamp
screw
and pull
cable
back until swivel
is against
stop.
Tighten
cable
clamp
screw
securely.
TO ADJUST
CHOKE
CONTROL
The choke control has been preset at the
factory and adjustment
should not be nec-
essary. Check adjustment
as described
below before loosening cable. If adjust-
ment is necessary,
proceed as follows:
1. With engine not running, move choke
control (located on dash panel) to full
choke position.
2. Loosen knob and remove cover as-
sembly from air cleaner.
3. Choke should be closed. If it is not,
loosen casing clamp screw and move
choke cable until choke is completely
closed. Tighten casing clamp screw
securely.
4. Replace air cleaner cover assembly
and tighten knob.
TO ADJUST
CARBURETOR
Your carburetor
is not adjustable.
If your
engine
does not operate
properly
due to
suspected
carburetor
problems,
take your
tractor
to a Sears
or other
qualified
service
center
for repair
and/or
adjustment.
High speed
stop is factory
adjusted.
Do
not adjust
- damage
may result.
IMPORTANT:
Never tamper
with the
engine
governor,
which
is factory
set
for proper
engine
speed.
Overspeed-
ing the engine
above
the factory
high
speed
setting
can be dangerous.
If you
think the engine-governed
high speed
needs
adjusting,
contact
a Sears
or other
qualified
service
center
which
has proper
equipment
and experience
to make any
necessary
adjustments.
Sto
Swivel
Clamp
Screw
Clamp Screw
27
Publicidad
