Victron energy Blue Smart IP65 Charger Serie Manual página 3

SAFETY INSTRUCTIONS
Always provide proper ventilation during charging.
Avoid covering the charger.
Never try to charge non-rechargeable or frozen batteries.
Never place the charger on top of the battery when charging
Prevent sparks close to the battery. A battery being charged could emit
explosive gasses.
Battery acid is corrosive. Rinse immediately with water if acid comes into
contact with skin.
This appliance is not designed for use by young children or people who
cannot read or understand the manual unless they are under the
supervision of a responsible person to ensure that they can use the battery
charger safely. Store and use the battery charger out of the reach of
children, and ensure that children cannot play with the charger.
Connection to the mains supply must be in accordance with the national
regulations for electrical installations. In case of a damaged supply cord
please contact the manufacturer or your service agent.
The battery terminal not connected to the chassis has to be connected first.
The other connection is to be made to the chassis, remote from the battery
and fuel line. The battery charger is then to be connected to the supply
mains.
After charging, disconnect the battery charger from the supply mains. Then
remove the chassis connection and then the battery connection.
The charger must only be plugged in an earthed socket.
1