DJI FC7BGC Guía De Usuario página 5

Linking
Ensure that all devices are powered on.
a. Aircraft + Goggles
1) Press the link button on the goggles. The goggles will
beep continually.
2) Press and hold the power button of the aircraft until the
battery level indicator blinks in sequence.
3) The battery level indicator of the aircraft turns solid and
displays the battery level. The goggles stop beeping
when they are successfully linked and the video display
is normal.
b. Aircraft + Remote Controller
1) Press and hold the power button of the aircraft until the
battery level indicator blinks in sequence.
2) Press and hold the power button of the remote controller
until it beeps continually and the battery level indicator
blinks in sequence.
3) The remote controller stops beeping when successfully
linked and both the battery level indicators turn solid and
display the battery level.
The aircraft must be linked with the goggles before the
remote controller.
对 频
对频前请确保所有设备均已开启。
a. 飞行器 + 飞行眼镜
1) 按下飞行眼镜的对频按键，飞行眼镜响起嘀 - 嘀...的
提示音。
2) 长按飞行器的电源按键直至电池电量指示灯循环闪烁。
3) 对频成功后，飞行器的电池电量指示灯常亮显示电量，
飞行眼镜提示音停止并显示图传。
b. 飞行器 + 遥控器
1) 长按飞行器的电源按键直至电池电量指示灯循环闪烁。
2) 长按遥控器的电源按键直至响起嘀 - 嘀...的提示音，且
电池电量指示灯循环闪烁。
3) 对频成功后，飞行器及遥控器的电池电量指示灯均常
亮显示电量，遥控器提示音停止。
飞行器需先完成与飞行眼镜的对频， 再进行和遥控器的对频。
4