THERMEx ASTON Instrucciones De Montaje página 72

72 THERMEX ASTON
INSTALLING THE DUCT FOR OPEN-AIR VENTING
If the hood is going to be installed with exhaust venting into the open air, the duct is installed
as follows:
1
Measure the placement of the bracket
and mark the position of the holes on the
wall.
NOTE: The bracket must be positioned so
that it matches the holes in the duct.
3
Screw the bracket onto the wall.
x2
2
x2
Pre-drill the holes and insert the
rawlplugs.
4
Install the exhaust outlet on the hood.
M 527230061212112015
x2