Listening To A Usb Device; Using Repeat/Shuffle Playback (Remote Control Only) - Yamaha MCR-B142 Manual De Instrucciones

LISTENING TO CD AND USB DEVICES

Listening to a USB device

1
2

Skipping folders (remote control only)

Display information (remote control only)

Using repeat/shuffle playback (remote control only)

The playback status is shown by the repeat/shuffle indicator in the front panel display.

Repeat playback
Press
select one of the following
playback modes.
No display: Repeat mode off
1 track
:
All tracks within the folder (data CD/
:
USB device only)
: All tracks
10
En
While a USB device is playing, you can use the remote control's FOLDER ▲/▼
buttons to select the folder.
The folder/file number is shown for several seconds when starting playback or
skipping tracks.
If you press DISPLAY on the remote control while a song is playing or paused, the
information shown on the front panel display will be switched in the following order.
Elapsed song playback time
Song name*
Album name*
Artist name*
File name
Folder name
* Shown only if this data is included in the song.
(repeat) repeatedly to
1 Press the USB source button to switch the
audio source to USB.
If a USB device is already connected, playback will start.
2 Connect a USB device to the USB port.
Playback starts automatically.
Playback can be controlled using either the remote control,
the front panel on this unit, or the USB device (☞ P. 4, 5).
• Folders and files will play in the order in which they were written.
• Your iPod/iPhone/iPad can also play back music and charge while
connected to the USB port.
Stop playback before disconnecting the USB device.

Shuffle playback
No display: Shuffle mode off
All tracks within the folder (data CD/
:
USB device only)
: All tracks
Press (shuffle) repeatedly to
select one of the following
playback modes.