Technical Data; Filter Settings - Beta 7043 Manual De Uso E Instrucciones

OPERATION MANUAL AND INSTRUCTIONS ISTRUZIONI PER L'USO

TECHNICAL DATA

VIEWING AREA
POWER SUPPLY
LIGHT STATE (DIN EN 379)
DARK STATE (DIN EN 379)
SWITCH TIME (DIN EN 379)
DELAY TIME (DARK TO LIGHT)
OPERATING TEMPERATURE
STORAGE TEMPERATURE
WEIGHT
USE
HEADGEAR ADJUSTMENT
• The headgear size can be manually adjusted to fit different wearers.
• Slightly rotate the knob on the back of the headgear, and adjust the width of the headband, so as to feel comfortable.
• The sides of the mask accommodate 3 holes for adjusting the viewing angle. Place the reference pins of the headband in the
most suitable hole. The ideal viewing angle is the one where the filter is perpendicular to the welding surface.

FILTER SETTINGS

Key to symbols
1. Interior screen guard
2. Delay time adjusting knob
3. Sensitivity adjusting knob
4. Solar cell
5. Auto-darkening filter
6. Sensors
8
92 x 42 mm
SOLAR CELL
4
9 – 13
1/1000s
0.1s ÷ 1.0s
-5°C +55°C
-20°C +70°C
0.490 kg
EN I