Designation; -Nominal Calorific Power; Description And Dimensions; Description - deville C07921 Instrucciones Para La Instalación Y El Uso

You are advised to have a thorough and
careful reading of the instructions for use in
order to get the best use and satisfaction of
your DEVILLE appliance.
The fact of not respecting the fixing, the
installing and the use istructions involves the
responsibility of the person who doesn't
respect them.
THIS STOVE MUST BE INSTALLED IN
ACCORDANCE TO THE CURRENT D.T.U.
SPECIFICATIONS..
The stove must be installed by a skilled
professional.
All the local and national regulations as well
as the European standards have to be
respected when the stove is used.
The appliance mustn't be modified.

1 - DESIGNATION

The stove is in line with the essential requirements of
the directive 89/106/CEE Produits de Construction
according to the annexe ZA of the EN 13229 standard.
It is a continuous combustion heating appliance with
grate which exclusively works with wood with a semi-
closed combustion chamber and which is designed to
be fitted in a chimney to be built.
Note down the serial number written on the descriptive
plate stuck on the appliance and on the certificate of
guarantee, write it down in the following box :
Serial number
This number will be necessary to identify your appliance
when spare parts will be needed.
Appliance is standard
Electromagnetic Compatibility Instruction modified by
the 93/68/EEC instruction.
2 – CALORIFIC NOMINAL POWER
Nominal Draught Smoke output /
power weight
11 kW 12 Pa
Nominal calorific power in continuous running : 11 kW.
. Obtained with a 12 Pa draught, in a one-hour burning,
with a loading of a piece of 4,5 kg of hard wood not
being split (oak, hornbeam...) of about 8 cm diametre,
that is to say 2 logs.
. To get this power rate, reload on an ash bed of about
0,4 kg that is 4,5-cm thick.
. The given power is the average power obtained during
a one-hour test, with the air intake damper opened at
its maximum.
The slow combustion :
to the 89/336/EEC
Smoke
temperatures
8 g/s 324 ° C
Obtained with a 6 Pa draught, with the air intake
damper in closed position.
Reload on an ash bed of about 0,3 kg that is 3-cm thick
It can last over 3 hours with 1 log of hard wood not split
with a total weight of 3,5 kg.
It can last over 10 hours with 1 or 2 logs (favour big
diametres) of hard wood not split of a total weight of
10,5 kg.
Normal speed conditions allow to get a maximum
power which is not to be exceeded to guarantee a
running in complete safety.
The maximum loading is 15 kg of wood

3 - DESCRIPTION AND DIMENSIONS

3.1 - Description

The main parts of your appliance are shown and
marked out on Fig. 1.
The combustion chamber is made of steel (4mm thick),
the bottom of the hearth is lined with a cast iron back
plate.
A metal sheet casing allows a cooling air flow around
the chamber of combustion and protects the walls of
the mantelpiece from radiance : it is a guarantee of
safety and performance.
The cast iron door is fitted with seals which ensure
smoketightness and allow a large autonomy of working.
The air damper, situated at the bottom of the door The
air damper, situated at the bottom of the door allows to
choose a fire speed.
An extra air intake is built in the upper part of the
window to keep it clean and ensure a better burning of
the wood.
A two-speed blower allows to activate the hot air
circulation. This equipment allows to send a hot air flow
in four different directions (adjoining rooms). Without
shaft, it will improve the convection where your
appliance is.
Blower output : 100 m³/h
Net weight of the appliance
Gross weight (without door,
deflector, grate, back plate)
3.2 - Dimensions (Fig. 2)
4 – ENVIRONNEMENT AND ADDITIONAL
EQUIPMENT

4.1 - Environnement

Your hearth can fit in a new DEVILLE fireplace.

4.2 - Optional Equipment

The appliance can be fitted on demand with :
• Hot-air release vent ∅ 125 mm réf. C07006.EU02
allowing to supply heat in the adjoining rooms (Fig.
3).
14
C07921
109kg
65 kg