Intended Use; Technical Data; Parts Of The Device - Festool TDC 18/4 Manual De Instrucciones

English
3

Intended use

Cordless drill suitable
– for drilling in metal, wood, plastics and
similar materials,
– for screwing in and tightening screws.
– intended for use with BP Festool battery
packs of the same voltage class.
4

Technical data

Cordless drills
Motor voltage
No-load speed*
Max. torque
Adjustable torque**
Chuck clamping range
Max. drill diameter
Screwdriving in spruce
Tool holder in drill spindle
Weight as per EPTA Procedure 01:2014 (with auxiliary handle,
BP 18 Li 6.2 AS battery pack and chuck)
Weight incl. Centrotec, excl. auxiliary handle and battery pack.
* Speed values based on fully charged battery pack.
** The maximum speed (value for clockwise rotation) is reduced in the lower torque settings.
5

Parts of the device

[1-1]
Buttons for releasing the battery pack
[1-2] Capacity indicator button on battery
pack
[1-3]
Capacity indicator
[1-4] LED light
[1-5] On/off switch
[1-6] Collar
[1-7] Auxiliary handle
[1-8]
Gear switch
16
The user is liable for damage and acci­
dents caused by improper and non-inten­
ded use; this also includes damage and wear
caused by continuous industrial operation.
1. gear
2. gear
3. gear
4. gear
Soft material (wood)
Hard material (metal)
1st gear/2nd gear
Wood
Metal
Max. ∅
[1-9] Rotational direction switch and safety
lock/transport lock
[1-10] Handle
[1-11] Thumbwheel for torque/drilling/light­
ing duration on and duration off
[1-12] belt clip
[1-13] Bit store
[1-14] Insulated gripping surfaces (grey
shaded area)
Accessories shown or described are not always
included in the scope of delivery.
The specified illustrations appear at the begin­
ning of the Operating Instructions.
TDC 18/4
18 V
0–500 rpm
0–800 rpm
0–2350 rpm
0–3600 rpm
50 Nm
75 Nm
2–20 Nm
1.5–13 mm
70 mm
13 mm
10 mm
1/4 ''
2.6 kg
1.4 kg