Assembling The Food Processor; Before First Use; Attaching The Work Bowl - KitchenAid KFP1133 Instrucciones

ASSEMBLING THE FOOD PROCESSOR

CMD + SHIFT CLICK TO CHANGE COPY

Before first use

Before using your Food Processor for the first time, wash all parts and accessories
either by hand or in the dishwasher (see "Cleaning the Food Processor" section).
NOTE: Your Food Processor is shipped with the work bowl cover installed on the
work bowl, with the mini-bowl inside the work bowl.
IMPORTANT: Place the Food Processor on a dry, level countertop with the controls
facing forward. Do not plug in the Food Processor until it is completely assembled.
HELPFUL TIP: See the "Lid Interlock Instructions" for more information on the best way
to attach the work bowl and lid for best results.
Grasp the feed tube on the work bowl
1
cover and turn it clockwise to remove it
from the work bowl.
Attaching the wor_k bowl
IMPORTANT: Your Food Processor will not operate unless the work bowl and work
bowl cover are properly locked on the base, and the large pusher is inserted to the
maximum fill line on the feed tube (approximately halfway down).
Place the work bowl on the base,
1
aligning the raised portion with the
indentation on the base. The center hole
should fit over the power shaft.
Power_ Shaft
Lift out the mini-bowl.
2
Grasp the work bowl handle and turn
2
the bowl counterclockwise to lock it
on the base.
9