Installation - Ashley Signature P556-665 Guia Del Usuario

Note: DO NOT tighten any bolts until all bolts have been started; Philips screw driver NOT included.
1. Attach the divider (F) to the back (J) with 2 bolts
¼ in x 30 mm (L), 2 flat washers (P) and 2
spring washers (R) by using the Allen wrench
(W) as shown on the right,(see Figure1).
2. Assemble the left side (C), the right side (D) and back (J) together with
flat washers (P) and 4 spring washers (R) by using the Allen wrench (W), (see Figure 2).
P556-665

INSTALLATION

Figure 1
4 bolts ¼ in x 30 mm (L), 4
Figure 2
Page 9 of 46