Your Kohler Whirlpool - Kohler K-1110-CT Guia Del Usuario

Activates Mode Selected
Rotate outer ring to
access desired mode.
Chromatherapy - Specific Color

Your Kohler Whirlpool

Your new whirlpool is designed to stimulate, invigorate, and energize your body with comforting
hydro-massage therapy. The whirlpool consists of the following components:
Remote Control - Places the whirlpool functions at your fingertips to further enhance your bathing
experience. The functions of the remote control are identical to the lighted user keypad.
Pump Motor - Provides quiet, variable speed power to circulate the water.
Heater - Automatically helps maintain a 104°F (40°C) water temperature, turns on when the
whirlpool is operating, and turns off when the pump motor is turned off. Using the lighted user
keypad, the heater may be turned off at any time while the pump is operating.
Effervescence - Eight effervescent ports emit thousands of champagne-like bubbles which provides a
relaxing, soothing experience.
Chromatherapy - Promotes relaxation and delivers a full spectrum of color. Chromatherapy may be
used with all modes of operation, even when the pump is not operating.
Lighted User Keypad - Located within easy reach, allows you to turn the whirlpool on and off. It
also allows you to access all the whirlpool modes and regulate the water flow or pulse speed.
Available modes will be illuminated in blue. Active modes will be illuminated in green.
Power
Outer Ring
OK
Up Arrow
Indicator Bar
Effervescence Mode
Down Arrow
Chromatherapy
Cycle
Heater
Chromatherapy -
Specific Color
1023261-5-C
Power On/Off
Turns the whirlpool pump on and off. Icons illuminated in blue indicate available
modes/features. Modes which are operating will be illuminated in green.
Rotate the outer ring to the desired mode. The selected mode will flash blue.
Activates the desired mode.
Increases the water flow when the Flexjet flow mode is active.
Displays the water flow volume in the Flexjet flow mode.
Ports activate to provide a gentle, soothing bubbling action.
Decreases the water flow when the Flexjet flow mode is active.
Chromatherapy lights will automatically and continuously cycle through the eight
colors: white, violet, indigo blue, aqua blue, green, yellow, orange, and red. One cycle
through all eight colors takes approximately one minute.
Automatically engages when the power icon is selected. Rotate the outer ring until the
heater mode is flashing, then press OK to turn the heater off. Press OK again to turn
the heater back on.
Press OK to activate, then use the up or down arrow to reach the desired color. Press
OK while the chromatherapy cycle is active to turn off the chromatherapy lights.
Increases Flow or Pulse
Indicator Bar
Effervescence Mode
Decreases Flow or Pulse
Chromatherapy Cycle
Heater On/Off
4 Kohler Co.