Loading Envelopes - Canon imageRUNNER ADVANCE DX C5760i Manual Del Usuario

For available paper, see the following.
Available Paper

Loading Envelopes

CAUTION!
• You can load envelopes in the paper drawer or multi-purpose tray.
• Do not use envelopes that have glue attached to their fl aps, as the glue may melt due to the heat and pressure of
the fi xing unit.
• Do not print on the reverse side of the envelopes (the side with the glued areas).
• For the paper drawer, load envelopes the front side face up, and for the multi-purpose tray, load them the front side
face down. For the loading orientation, see the table below.
Yougatanaga 3
Nagagata 3
Kakugata 2
Monarch*
COM10 No.10
DL
ISO-C5
Preparation before Loading Envelopes
1
Take five or so pieces of envelopes, fan them well
to eliminate curls, and level the stack flat.
AVPP-TBM
Search
Paper Drawer 1
Paper Drawer 1
—
Press the stack along
the four side edges.
How to use the search number
Paper Drawer 2
Envelope
Paper Drawer 2
* You cannot load the envelops in the paper drawer 1.
2
To prevent the sealing edge of the seal flap from
floating from the body of the envelope, press the
envelope in the four corners and expel the air.
P.45
Multi-Purpose Tray
Multi-Purpose Tray
13