Loading Envelopes - Canon imageRUNNER ADVANCE 4551i III Guía De Preguntas Frecuentes

Loading Envelopes

CAUTION!
• You can load envelopes in the paper drawer 2 or multi-purpose tray.
• Do not use envelopes that have glue attached to their flaps, as the glue may melt due to the heat and pressure of
the fixing unit.
• Do not print on the reverse side of the envelopes (the side with the glued areas).
• For the paper drawer 2, load envelopes the front side face up, and for the multi-purpose tray, load them the front
side face down. For the loading orientation, see the table below.
ISO-C5
Monarch
COM10 No.10
DL
Yougatanaga 3
Nagagata 3
Kakugata 2
Preparation before Loading Envelopes
1
Take five or so pieces of envelopes, fan them well
to eliminate curls, and level the stack flat.
Paper Drawer 2
Envelope
Paper Drawer 2
Press the stack along
the four side edges.
Multi-Purpose Tray
Multi-Purpose Tray
2
To prevent the sealing edge of the seal flap from
floating from the body of the envelope, press the
envelope in the four corners and expel the air.
13