Greenlee AMT Serie Manual De Instrucciones página 5

IMPORTANT SAFETY INFORMATION
• Do not change accessories, inspect, adjust or
clean the tool or sharpen the chain when it is
connected to a power source. Accidental startup
could result in serious injury.
• Keep the handles clean, dry and free of hydraulic
fluid.
• Maintain a firm grip on tool, using both hands with
thumbs and fingers encircling the handles at all
times. Serious injury could result if an operator
does not control the tool.
• Do not lock the trigger in the Power-ON position.
Operator cannot stop tool when trigger is locked.
• Do not remove or modify the tool's safety trigger.
Accidental startup could result in serious injury.
• Wear protective gloves when handling or adjusting
the chain. The chain can cut even when stationary.
Failure to observe these warnings could result in
severe injury or death.
Saw body, bar, blade and other
components will be hot during and
after use. Use care when handling
the saw. Hot surfaces can cause
serious burns.
Failure to observe this warning could
result in severe injury or death.
To transport the chain saw:
• Allow the chain to stop rotating.
• Wait for the chain to cool.
• Use an appropriate guide bar sheath or scabbard.
• Carry the saw with the guide bar toward the rear.
Failure to observe these warnings could result in
severe injury or death.
Greenlee
Long-Reach Chain Saws (Foam-filled)
Do not disconnect tool, hoses or fittings while the
power source is running or if the hydraulic fluid is
hot. Hot hydraulic fluid could cause serious burns.
Do not reverse hydraulic flow. Operation with
hydraulic flow reversed could cause tool malfunc-
tion. Connect the pressure hose and tank hose to the
proper ports.
• Use this tool for trimming or pruning trees only.
Any other use may result in injury or property
damage.
• Inspect tool before use. Replace any worn,
damaged or missing parts. A damaged or improp-
erly assembled tool can malfunction, injuring
nearby personnel.
• Inspect hydraulic hoses and couplings every
operating day. Repair or replace if leakage, crack-
ing, wear or damage is evident. Damaged hoses
or coupling could fail resulting in injury or property
damage.
• Ensure that all bystanders and unnecessary
personnel are clear of the work area when operat-
ing the tool. Nearby personnel may be injured by
falling debris.
Failure to observe these precautions may result in
injury or property damage.
5
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070