Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 7
INSTRUCTIONS ON ASSEMBLY AND USE
EN
CONGRATULATIONS ON PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral component of
the product. Therefore, please store them and the packaging carefully in case questions
arise in the future. Please always include these instructions when handing on the product
to a third party. This product must be assembled by an adult. This product is not designed
for industrial use. The use of the product requires certain capabilities and skills. Always
adjust according to the age of the user and use for the purpose it has been designed for.

TECHNICAL SPECIFICATIONS:

Item:
Stand Basketball set Pro XXL
Item number:
71661
Weight:
18,8 kg
Height-adjustable: 260 - 305 cm
If you have assembly problems or would like further information on the product, we have
all you need and more at http://www.hudora.de/.
CONTENTS
1 x Basketball stand
1 x Manual
Other items included are meant to facilitate safe transportation and are not required for
the installation and use of the product.
GENERAL TRAINING PRINCIPLES
1. Warming up:
Warm up before each exercise routine. Walk or run in place, stretch or light calisthenics as
a warm-up before using the home trainer.
2. respiration:
The correct respiration plays an important roll in training. Breathe quietly and uniformly.
Never stop breathing during training.
3. Clothing and place:
Dress in comfortable clothing during training and see that you have a sufficient place
for the execution of the exercises. Always wear sport shoes, do not train with bare feet,
sandals, or stockings.
4. Cooling down:
Cool yourself down after the training with easy stretching or calisthenics. This way your
heart rate can slowly decrease and the body can regenerate more quickly for the next
exercise routine because the metabolic waste (Lactate) can be more efficiently disposed
of with slow cool downs.
5. health:
Quit your exercise immediately if you notice a pulling in the muscles or general pain as you
practice. Contact a physician for your safety.
use: Ensure that the equipment is in a firm and stable position. Adapt the training time to
your performance capabilities, and do not over-tax yourself.
Warning: As a matter of course, you should consult your doctor before starting to train.
SAFETY INSTRUCTIONS
• Place the basketball stand on a firm and level surface and make sure this piece of
equipment is positioned securely and firmly.
• Check that all connections have been tightly fastened before using the basketball
stand and check again later!
• Always fill the base with water or sand so that the stability of the basketball stand is
assured and it won't fall forwards. We would recommend filling the base with sand
rather than water as water will flow out if there is a hole. This could cause the product
to fall over and cause damage to objects or injury to people.
• This training equipment is NOT a toy!
• Never allow children to play in the immediate proximity of this piece of training equip-
ment without supervision and never let them assemble it.
• Never use the basketball stand near water or leave it outside in the rain.
• Wear suitable clothing when training. The clothes must be constituted in such a way
that they cannot catch in anything during the training due to their fit.
• Always wear training shoes, and never train in bare feet, or when wearing sandals,
socks or stockings.
• Never wear jewellery which could catch in the basketball basket.
• Do not climb up the basketball stand.
• Do not hang off the basket or make slam dunks, the basketball stand could tip over.
• If you start to feel unwell, discontinue training immediately.
TOOLS REQUIRED
• 13 mm Allen key
• Hammer (not supplied)
• Spirit level (not supplied)
All images are examples of the design.
ASSEMBLY INSTRUCTIONS
step 1:
Attach the rollers and the lower bar no.8 with the axle bolt to water base. Position this as
shown in the diagram. (Diagram 1)
step 2:
Attach the lower left and right struts (no.12 & 13) to the lower bar no.8 by screw no.17,
attach also the left and right struts to the water base by screws no.19. (Diagram 2)
step 3:
Prior to fill water to base, attach the sealing cup no. 15 to base and screw it tight. Now fill
the base with water or sand, close base at top side by plug no. 14 after filling base with
water or sand. (Diagram 3)
step 4:
Attach the basket to backboard and the upper bar by 4 screws no. 16. Attach the upper
struts to the upper bar and the backboard by screws no. 20 and no. 18. (Diagram 4)
step 5:
Attach the net to the ring. (Diagram 5)
step 6:
Insert the upper bar (complete with backboard and basket ) at least 11 cm into the middle
bar by 2 sets screw no.20. Prior to fixing, you need to choice the desired height for playing.
(Diagram 6)
step 7:
Attach middle bar (completed with upper bar and backboard and rim) to lower bar by screw
no.20. At this stage, better have a helper to hold the middle bar. (Diagram 7)
Transport:
When the base filled with water or sand, it's quite heavy as the whole set will be around 130
kgs. For moving, you need to have a helper to tip the base from end onto the rollers, and
then pull or push to the required location. We height recommend you position the product at
the desired place before filling with water. Too often moving may cause damage on the base
or metal frame due to the heavy weight.
MAINTENANCE AND STORAGE
Use a dry or damp cloth only to clean the product; do not use special cleaning agents!
Check the product for damage or traces of wear and tear before and after each use. Do
not make any structural changes. For your own safety, please use original spare parts
only. These can be sourced from HUDORA. If parts become damaged or if sharp edges
or corners should develop, the product may not be used any more. If in any doubt, please
contact our service team (http://www.hudora.de/). Store the product in a safe place
where it is protected from the elements, cannot be damaged, and cannot injure anyone.
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection point
provided in your area. Local waste management companies will be able to answer your
questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we put just
as much effort into rectifying them. Therefore, you can find numerous information on the
product, replacement parts, solutions to problems and lost assembly manuals at http://
www.hudora.de/artnr/71661/.
HUDORA | Jägerwald 13 | 42897 Remscheid | Germany
www.hudora.de
Item no. 71661
As of 01/12
Page 5/12

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

71661

Tabla de contenido