Using The Mode Button; Programming Memory Locations - Cobra microTALK PR 955 DX Instrucciones Operativas

O P E R AT I O N • A D VA N C E D F E AT U R E S

Using the MODE button

The MODE button allows you to use and
program the various functions of your
microTALK ® radio. If you press and hold the
MODE button, the LCD will cycle through the
different functions.
MODE
button
Using VOX Mode
In VOX mode, your microTALK ® can be used
"hands-free," automatically transmitting when
you speak. To turn VOX mode on and off:
1. Press the MODE button until the VOX icon
flashes and the current setting ("on" or
"off") is displayed.
2. Push the CHANNEL SELECT button up or
down to turn VOX mode on or off.
CHANNEL
SELECT
button
7
ENGLISH
3. Press and release the ENTER button
to enter the new setting, or press the
MODE button to enter the new setting
and proceed to other functions.
Setting the VOX
Sensitivity Level
You can set the VOX sensitivity level to fit the
volume of your voice and avoid transmissions
triggered by background noise. To set
the sensitivity:
1. Press the MODE
button until the VOX
icon flashes and the
number for the
current sensitivity
level is displayed
next to the letter L (level 5 = most
sensitive, level 1 = least sensitive).
2. Push the CHANNEL SELECT button up or
down to change the setting.
3. Press and release the ENTER button to
enter the new setting, or press the
MODE button to enter the new setting
and proceed to other functions.
ENTER button
MODE button
ENGLISH
Programming Memory
Locations
Your microTALK ® radio has 10 memory
locations (1-10) for storing your most
frequently used channels and privacy codes.
To program locations:
1. Push the MODE
button until the
Memory icon and
MODE
button
the memory
location flashes.
2. Select the memory
CHANNEL
location you wish
SELECT
to change by button
pushing the
CHANNEL SELECT
button up or down.
3. Press and release the MODE button again.
The Memory icon and the main channel
number will flash.
4. Select the main channel you wish to store
by pushing the CHANNEL SELECT button up
or down.
O P E R AT I O N
5. Press the MODE
button again to
store the main
channel in memory
and move to
privacy code selection. The privacy code
number begins flashing and the Memory
icon continues to flash.
6. Select the privacy code (00-38) you
wish to store by pushing the CHANNEL
SELECT button up or down.
7. Press the ENTER
button to program
TALK button
your selection. You
may also press the
TALK button to
transmit your selected channel and
privacy code, which will be stored into
the memory location you are using.
(NOTE: To "unprogram" a memory
location you programmed previously,
select 00 for both the main channel and
privacy code in steps 4 through 6.)
8. Press and release the ENTER button to
return to Standby mode at your new
memory location, or press and release the
MODE button to
ENTER button
save the
MODE
memory location
button
and proceed to
other functions.
8