Fuse Replacement - Irritrol TOTAL CONTROL 6 Guía De Instalación Y Programación

FUSE REPLACEMENT

If fuse replacement is required, replace only with the
same type and rating. Installing a higher amperage fuse
can result in serious injury and or equipment damage
due to fire hazard.
1. Disconnect power to the controller.
2. Carefully remove the fuse (item 17 on page 3) from the end clips.
3. Install a new 2.0A slow-blow fuse, ensuring it is securely seated in
both end clips.
4. Restore power to the controller.
Fuse Replacement
WARNING
27