Voice Dialing - Nokia N73 Manual Del Usuario

Select a participant, and select Private. The conference
call is put on hold on your device. The other participants
can still continue the conference call. After you finish
the private conversation, select
conference to return to the conference call.
To drop a participant, select
Drop participant, scroll to the participant, and
select Drop.
4 To end the active conference call, press
1-touch dial a phone number
To activate1-touch dialing, press
Settings > Call >
To assign a phone number to one of the 1-touch dialing
keys ( — ), press
Scroll to the key to which you want to assign the phone
number, and select
the voice mailbox.
To call in the standby mode, press the 1-touch dial key
and .
64
Options >
Options > Conference
, and select
1-touch dialing> On.
, and select Tools >
Options > Assign. is reserved for

Voice dialing

Your device supports enhanced voice commands.
Enhanced voice commands are not dependent on the
Add to
speaker's voice, so the user does not record voice tags
in advance. Instead, the device creates a voice tag for
>
the entries in contacts, and compares the spoken voice tag
to it. The voice recognition in the device adapts to the
main user's voice to recognize the voice commands better.
.
The voice tag for a contact is the name or nickname that
is saved on the contact card. To listen to the synthesized
voice tag, open a contact card, and select
Play voice
Tools >
Make a call with a voice tag
Note: Using voice tags may be difficult in a noisy
Spd. dial.
environment or during an emergency, so you should
not rely solely upon voice dialing in all circumstances.
When you use voice dialing, the loudspeaker is in use.
Hold the device at a short distance away when you say
the voice tag.
1 To start voice dialing, in the standby mode, press and
hold the right selection key. If you are using a compatible
headset with the headset key, press and hold the headset
key to start voice dialing.
tag.
Options >