Palmer PAN16 DI-BOX Manual De Usuario página 5

Ocultar thumbs Ver también para PAN16 DI-BOX:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

caution – hiGh VoluMe leVelS with auDio pRoDuctS!
This equipment is intended for professional use. Therefore, commercial use of this equipment is subject to the
respectively applicable national accident prevention rules and regulations. As a manufacturer, Adam Hall is
obligated to notify you formally about the existence of potential health risks.
Hearing damage due to high volume and prolonged exposure: When in use, this product is capable of produc-
ing high sound-pressure levels (SPL) that can lead to irreversible hearing damage in performers, employees,
and audience members. For this reason, avoid prolonged exposure to volumes in excess of 90 dB.
caution! iMpoRtant infoRMation aBout liGhtinG pRoDuctS
1.
Do not look into the beam from a distance of less than 40 cm.
2.
Do not stare into the beam for extended periods at short-to-medium distances.
3.
Do not view the beam directly with optical instruments such as magnifiers.
4.
Under some circumstances, stroboscopic effects may trigger epileptic seizures in sensitive individuals!
For this reason, persons who suffer from epilepsy should always avoid places where strobe lights are
used.
8
connectoRS
The PAN16 has eight independent channels. The following description applies to each of the channels 1 - 8
Line level signals, such as those from keyboards are connected via a shielded instrument cable with a jack
plug (6.3 mm mono jack / TS jack) into the jack designated as "Input". If the signal is to be simultaneously
connected to a different amplifier, use the "LINK" jack as a parallel connector for looping the signal. Unbal-
anced instrument cables should not be longer than absolutely necessary. Therefore, the PAN16 should also be
set up near the unbalanced source.
The low impedance balanced output signal is available on the rear panel xLR/m socket. The assignment of the
socket is standard, with a hot PIN 2.
The connection to a mixer input is performed with a balanced, shielded microphone cable. The cable length is
not critical and may be 100 feet or more, without an audible deterioration of the signal.
the MeRGe linK / in function
Alternatively, the PAN16 also offers the possibility, for the stereo signal such as that of a keyboard to sum to a
9

Publicidad

Tabla de contenido
loading

Tabla de contenido