Nosepiece Table - Rivets Per Battery Charge; Safety Instructions - Gesipa PowerBird Instrucciones De Manejo

1.4. Nosepiece table – Rivets per battery charge
Blind Rivet-Ø Material
in mm
4,8 and 5,0 Steel
4,8 and 5,0 Stainless Steel
6,0 Alum
6,0 Steel
6,4 Alum
6,4 Steel
BULB-TITE Material
®
Blind Rivet-Ø
4,0 Alum/Alum
5,2 Alum/Alum
6,3 Alum/Alum
6,3 Steel/Steel
6,3 Monel/Stainless Steel
7,7 Alum/Alum
MEGA GRIP ® Material
Blind Rivet-Ø
4,9 Alum/Alum
6,6 Alum/Alum
4,9 Steel/Steel
6,6 Steel/Steel
4,9 Stainless Steel
6,6 Stainless Steel
* available as special accessories.
Elongated nosepieces and other special nosepieces are available upon request.

1.5. Safety instructions

Blind rivet setting tool PowerBird
Caution:
Following safety rules must be followed
for adequate protection against electrical schock,
injuries or fire hazards:
•
The riveting tool should be used exclusively
to set blind rivets.
•
Do not overload the tool; Work within the
prescribed work capacity.
•
Do not expose the tool to humidity or rain,
do not operate the tool close to inflammable
substances or gases: Risk of explosion!
10
Pcs. / Nosepiece Part. No.
Charge
420 17/32 725 2067
400 17/36 725 2083
400 17/36 725 2083
220 17/40 725 2560
300 17/45 724 3065
180 17/45 724 3065
Pcs. / Nosepiece Part. No.
Charge
720 17/26 BT* 725 2202
660 17/32 BT* 725 2210
420 17/42 BT* 725 2229
220 17/42 BT* 725 2229
270 17/42 BT* 725 2229
340 17/48 BT* 725 2237
Pcs. / Nosepiece Part. No.
Charge
17/31 MG*
430 725 2250
17/41 MG*
300 724 3146
17/31 MG*
300 725 2250
17/41 MG*
100 724 3146
17/31 MG*
300 725 2250
17/41 MG*
100 724 3146
•
Ensure that the battery is properly secured in
®
the tool handgrip.
•
Remove the battery when the tool is not in use
and for repair/servicing operations.
•
Do not use the tool as a hammer.
•
When not in use, keep the tool in a dry closed
room, out of reach of children.
•
When working with the tool, always carry
protection goggles. Personal protection like
clothes, gloves, safety helmet, non slipping
shoes, ear protectors and protection against
fall are highly recommended.
Jaw Part. No. Jaws
Pusher
66 724 3294 11
66 724 3294 11
66 724 3294 11
10 724 3073 11
10 724 3073 11
10 724 3073 11
Jaw Part. No. Jaws
Pusher
66 724 3294 11
66 724 3294 11
10 724 3073 11
10 724 3073 11
10 724 3073 11
10 724 3073 55*
Jaw Part. No. Jaws
Pusher
66 724 3294 56*
10 724 3073 56*
66 724 3294 56*
10 724 3073 56*
66 724 3294 56*
10 724 3073 56*
Part. No.
710 2208
710 2208
710 2208
710 2208
710 2208
710 2208
Part. No.
710 2208
710 2208
710 2208
710 2208
710 2208
715 1527
Part. No.
716 1026
716 1026
716 1026
716 1026
716 1026
716 1026