Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
The device must only be connected with an electric installation carried out in compliance with the IEC-
standards. The electric installation must be equipped with a Residual Current Device (RCD) with a maximum
fault current of 30 mA.
Lighting effects must not be connected to dimming-packs.
OPERATION
The device has two operating modes. It can be operated via IR remote control or it can be run in DMX-
controlled mode via a DMX controller.
After you connected the spot to the mains, the EUROLITE LED Floodlight starts running.
OPERATION VIA IR REMOTE CONTROL
Direct the remote control towards the front of the spot. The maxium operating range is 10. If the spot is
controlled via a DMX controller the remote control is deactivated.
DMX-CONTROLLED OPERATION
You can control the spots individually via your DMX-controller. Every DMX-channel has a different
occupation with different features. The individual channels and their features are listed under DMX-protocol.
The starting address can be defined via the remote control and is the first channel from which the device will
respond to the controller.
FUNCTION
Manual color adjustment
via the brightness of the RGB LEDs
Automatic change
speed for change of color adjustable
Sound-controlled color change*
*only available for indoor models
Programs
7 static colors; color change and color
fade with adjustable speed
Flash
speed of flash adjustable
Black Out
turns
LEDs
on and off
DMX starting address
DMX controlled mode
Slave mode
20/40
BUTTON
-
+
R
-
+
G
-
+
B
A
-
+
SP
SA
-
+
PROG
-
+
SP
-
+
F
S
0
9
D
SL
00027014.DOC, Version 1.1
MODE
Publicidad
Tabla de contenido
