Other Issues - Sony XDP-MU110 Manual De Instrucciones

The arm does not hold the iPod/iPhone
properly.
 The rubber used in the upper part of the arm
becomes hard at low temperature.
– Allow the ambient temperature to increase,
then set the iPod/iPhone.
Remote commander
The / buttons on the remote
commander do not work.
 The car audio unit is selected as the source.
These buttons are available only when an iPod/
iPhone is selected as the source and the music
player on the iPod/iPhone is activated.
The remote commander does not work.
 Make sure the remote commander is pointed
at the remote sensor on the cradle.
 Replace the lithium battery.
 Make sure that the cradle cable is connected to
the cradle securely.
 Remove the iPod/iPhone from the cradle and
then press the RESET button on the DSP
master unit.

Other issues

Sound is heard only from the front speakers.
 Set the INPUT SELECT switch on the DSP
master unit to "2ch."
There is no sound when the car audio unit is
selected as the source.
 Press the SOURCE/OFF button on the cradle
or the remote commander repeatedly until the
LED indicator on the cradle turns blue.
 Make sure that the car audio unit is turned on.
There is no sound when an iPod/iPhone is
selected as the source.
 Press the SOURCE/OFF button on the cradle
or the remote commander repeatedly until the
LED indicator on the cradle turns red.
 If there is still no sound, even though the LED
indicator on the cradle is red:
• Make sure that the iPod/iPhone is set on the
cradle securely.
• Remove any case or cover from the iPod/
iPhone.
• Operate playback on the iPod/iPhone
directly.
Sound reduces suddenly.
 Temperature detection could be activated.
– Be sure to place the system in a well
ventilated location.
– Reduce the volume.
Suddenly there is no sound.
 Temperature detection could be activated.
– Be sure to place the system in a well
ventilated location.
– Reduce the volume.
Volume range is limited.
 Temperature detection could be activated.
– Be sure to place the system in a well
ventilated location.
– Reduce the volume.
The iPod/iPhone Screen Rotation function
works unexpectedly when the car is being
driven.
 The Screen Rotation can be caused by
vibration, according to the road condition.
– Turn this function off.
No sound is heard from the subwoofer.
 Ensure that the subwoofer is connected
properly to the system, and the SUBWOOFER
switch is set to "Y" on the DSP master unit.
21