Sound Settings; Optimized Sound Setting Based On Your Vehicle - Sony XDP-MU110 Manual De Instrucciones

Sound Settings

Optimized sound setting
based on your vehicle
This system provides well balanced sound,
which appears to come from in front of the
driver's seat, optimized for the vehicle type
by setting the DSP master unit. 12 different
settings are available.
Warning
• Avoid touching the top of the DSP master unit
when setting the switches, as it becomes hot
during use.
Notes
• Set the sound of the car audio unit (BASS/
TREB/Loudness, etc.) to the flat position.
• Set the switches on the front panel of the DSP
master unit with your fingers. Do not use any
tools when setting these switches.
SW LOCATION switch
Select from one of three positions (FAR/
MID/NEAR) based on the distance between
the driver's seat and where the subwoofer is.
This function only works when a subwoofer
is connected to the system and the
SUBWOOFER switch on the DSP master
unit is set to "Y."
SUBWOOFER switch
Select "Y" (yes) or "N" (no) depending on
whether the subwoofer is connected to the
system. Select "Y" when the subwoofer is
connected.
VEHICLE SIZE switch
Select from one of three sizes (L/M/S) based
on the air volume of your car.
8
See the following examples.
Compact hatchback
VEHICLE SIZE: S
SUBWOOFER: Y
SW LOCATION: MID
Middle sized sedan
VEHICLE SIZE: M
SUBWOOFER: N
SW LOCATION: –
Pickup Truck
VEHICLE SIZE: S
SUBWOOFER: Y
SW LOCATION: NEAR