Before First Use - Hamilton Beach 33564 Manual De Instrucciones

How to Use IntelliTime™ Mode
BEFORE FIRST USE: Wash lid and crock in hot, soapy water. Rinse and dry.
1
Plug in slow cooker. Press ON/
OFF button to turn on. Display
will flash 4:00. (Slow cooker will
start at 4:00 if no other setting is
selected.)
5
6
840229800 ENv02.indd 6 840229800 ENv02.indd 6
2
Rotate knob to the right to select cooking time from 4 to 12 hours in
30-minute increments. Push button to start or wait a few seconds and
slow cooker will start automatically. The slow cooker will beep when
it starts and IntelliTime light will be illuminated.
NOTE: Display flashes when setting can be changed and remains lit
after the beep and cooking starts. Once cooking starts, settings cannot
be adjusted. Turn slow cooker off and restart to reset.
To turn off at any time, press and
hold ON/OFF button. Unplug from
wall outlet.
(cont.)
3
EXAMPLE FOR SETTING INTELLITIME: Your recipe for Beef Stew
calls for cooking on LOW for 6 to 8 hours. You will be away from
home for 10 hours. Ignore the recipe time and set the dial for 10
hours. The slow cooker adjusts heat to make your Beef Stew ready
to eat, not overcooked, at 10 hours. Can't make it home in 10 hours?
No problem, the slow cooker automatically switches to WARM for up
to 4 hours after cooking time has ended.
4
When cooking is finished, slow
cooker will automatically switch
to the WARM setting.
MAX cooking time is 12 hours
with an additional 4 hours of
warming time. After any time
setting, the slow cooker will
automatically switch to WARM
for up to 4 hours.
5/22/13 4:33 PM 5/22/13 4:33 PM