Panasonic CZ-RTC6BLW Instrucciones De Uso página 12

3.
Make the remote controller operate in Auto
mode.
„Remote controller
Follow the instructions on the app screen.
„Mobile device
Confirm that "Operating in Auto mode" is displayed then tap "Next".
4.
When the network connection to the router is
successful, "Connected to router" is displayed
on the remote controller screen.
• It may take some minutes for the connection to be established.
„Mobile device
Tap "Next".
Note
• If the remote controller screen does not change to "Connected to router", check the wireless LAN router
connections.
„ This completes the settings for connecting to the router. Go to Step 6 to continue making
the settings.
5
Connect to the network using AP mode.
(For iOS 11.0 or later and Android™ 4.4 or later
only)
1. Make the remote controller operate in Manual
mode.
„Remote controller
Follow the instructions on the app screen.
„Mobile device
Confirm that "Operating in Manual mode" is displayed, then tap
"Next".
2.
Join to connect to the "Panasonic-CZ-C-
wirelessAP" network.
„Mobile device
(First time only)
Tap "Allow While Using App". Then, tap "Join".
(Subsequent connections)
Tap "Join".
12