Basic Operation - Kenmore 111.83522 Manual De Uso Y Cuidado

Basic Operation

Time-of-Day Clock
1. Touch the CLOCK Pad.
2. Set the time of day by touching the appropriate numbers.
3. Touch the CLOCK Pad.
• After plugging in the oven or after a power outage, "88:88" will be displayed. Touch the
STOP/CANCEL Pad and set the clock following the directions above.
• The time-of-day clock is a 12 hour clock.
• If set, the time of day will always be displayed when no other cooking function is being used.
• The time of day returns to the current time when the oven turns off.
Time Cook
1. Touch the TIME COOK Pad.
2. Touch the appropriate number pads to set the cooking time.
For example, for 5 minutes touch numbers 5, 0, 0. The selected time will be displayed.
3. Touch the START Pad.
• The oven will start cooking and time countdown will begin.
• The oven will stop automatically when the time is done and beep three times.
• When the cook time ends, "End" appears in the display.
• To pause countdown open door or press Stop pad. To resume countdown, close door and
press Start pad. To cancel cooking cycle once countdown begins press Stop pad twice.
• Start with the shortest recommended time and add more time as needed.
• Check the food as it cooks.
• The oven door can be opened any time during operation. Cooking will automatically stop and
maintain the time setting until the door is closed and the START Pad is touched again.
• If the START Pad is touched and the oven does not operate, check the area between the door
and door seal for obstructions. The oven will not start until the door is completely closed.
Power Level
Full power (level 10) is automatic. If you wish to use a different power level, touch the POWER
LEVEL Pad before touching START Pad. Enter the power level desired by touching the POWER
LEVEL Pad repeatedly. The selected power level will be displayed. (See Power Level Cooking
Guide on next page.)
EN-11