Technical Information; Installation Considerations - Hansgrohe Croma C 100 3-Jet 04070 5 Serie Instrucciones De Montaje / Manejo / Garantía

5¾"
Croma C 100 3-Jet
This unit meets or exceeds the
following:
•
•
•
2
3¼"
04333xx5
ASME A112.18.1
CSA B125.1
Listed by IAPMO for use in the
US and Canada
English

Technical Information

Flow rate

Installation Considerations

• For best results, Hansgrohe recommends that
this unit be installed by a licensed, profes-
sional plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
• To prevent scald injury, the maximum output
temperature of the shower mixing valve (not
included) must be no higher than 120°F. In
Massachusetts, the maximum output tempera-
ture can be no higher than 112° F.
• This showerhead is for use with automatic
compensating valves rated at 2.0 GPM (7.6
L/min) or less.
• Keep this booklet and the receipt (or other
proof of date and place of purchase) for
this product in a safe place. The receipt is
required should it be necessary to request
warranty parts.
2.5 GPM