1. Insert the wedge shape tool* as it is shown in the picture. A piston will be released, leaving a
gap where the user must fix the needed accesory.
2. For taking out the accesory, the wedge shape tool* must be inserted as explained above. When
the piston is released, the user must pull out the accesory.
3. Proceeding as previously commented, the end of the spring will be freed from the accesory.
1
*Tool included.
For using spring
by pulling button (B). Then, spring
machine.
C
8
INSTRUCTIONS FOR CHANGING THE ACCESORIES
2
(A)
with any of the accesories shown on page 14, piece
(A)
must be introduced by hand into the inner space of the
A
3
(C)
must be taken out
B
C