Technical Data; Assembly - Greencut GTC220X Manual De Instrucciones

TECHNICAL DATA

Engine
Displacement
Power output
Fuel type
Fuel capacity
Type of oil
Oil capacity
Ignition system
Starter system
Transmission oil type
Transmission oil capacity
Transmission
Reducer transmission
Working width
Working depth
Blades
Weight
NOTE: Greencut reserves the right to modify technical data without prior notice.

ASSEMBLY

The power tiller comes fully assembled except for a few parts. The following instructions will help you mount and
adjust the handlebars, cable tension and handlebar height. You will need two 9/16" wrenches to complete the
assembly.
NOTE: The product leaves the factory without oil. You must add it before starting the engine.
STEP 1: INSTALLING THE DEPTH SETTING DEVICE
1. Install the depth adjuster at the top of the depth adjuster bracket with the handle facing backwards.
2. Insert the depth adjuster pin through the bracket making sure the hole in the top is free.
GTC220X
Gasoline 4-stroke OHV
208cc
7cv / 3,600rpm
95 lead-free
3,6L
10W30 / 10W40 / 15W30 / 15W40
0,7L
Electronic CDI
EASY-START Manual
80W90
1L
By belts
Screw spindle + gear rim
70cm
17,5 - 35cm
Tempered iron
78Kg
63
EN