Seca 862 Manual Del Usuario página 29

Limit value
The seca 862 personal scale is designed for checking strain in those with walking difficul-
ties or in patients who have had surgery on the locomotor apparatus. A weight limit value
can be set. In attempts to walk on the weighing platform, an alarm sounds if the load limit
value is exceeded. This avoids overload and allows load to be increased gradually under
controlled conditions. Applications include orthopaedic departments and physiotherapy
practices.
– Press the Start key with no load on the
scale.
,
se(a 8. 8 . 8 . 8 . 8 .
secutively in the display. The scale is
then automatically set to zero and ready
for operation.
– Press the FUNC key.
The last function used appears in the
display.
– Use the arrow keys to select function
FU 2. Activate the limit value function by
pressing the FUNC key again.
In the display you will see the last limit
value set.
– You can use the arrow keys to adjust
the value in increments according to the
graduations displayed.
– Once the correct value is set, press the
FUNC key again.
The limit value function and the alarm
signal are now activated.
– Step carefully onto the scale.
If the limit value entered is exceeded, an
alarm sounds.
– To switch off the scale, press the Start
key again.
Important note:
if the scale is switched off or switches off automatically, the limit value function
has to be reactivated by the method described above.
Check yourself the settings made and that the scale is working properly before
a patient uses the scale.
Model 862
and appear con-
0. 0 0
GB
29