Mophie juice pack air Manual De Instrucciones página 14

Why aren't the LEDs blinking while the juice pack
is charging?
After connecting to a power source, the LED status
indicator will start blinking to indicate charging.
The lights will turn off after 30 seconds allowing for
a good night's rest. Remember to check the status
indicator before you disconnect. When all four LEDs
are lit, your juice pack is fully charged.
What is the best method for charging my iPhone
using the juice pack?
Assuming the iPhone and juice pack are both fully
charged, we recommend waiting until your iPhone
has 20% battery left. When you're in the red, flip the
standby switch to green and let the juice pack to do
the heavy lifting. The iPhone requires more power to
charge past 80%, so if you want to get the greatest
battery boost from the juice pack, we suggest flipping
back to standby mode until your phone battery is low
again. This isn't the end-all-be-all, but we like it.
What is the best method for charging my juice pack?
Connect the juice pack to a power source using the micro
USB cable that came with your juice pack. The USB cable
can be plugged in to your computer or any "Made for
iPhone" power source with a USB out. You do not need to
remove your iPhone from the juice pack to charge. Leaving
the juice pack on your phone while charging will actually
charge both the case and your iPhone simultaneously!
14