Descargar Imprimir esta página

Mophie juice pack air Manual De Instrucciones página 7

Ocultar thumbs Ver también para juice pack air:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 64
Make sure that the connector is securely inserted
into the bottom of the phone and the standby
switch is turned "On, " or from red to green. When
your phone recognizes the juice pack, a battery
symbol will appear on the screen and you will hear a
chirp from the iPhone. This indicates that the phone
is charging and/or using the power from the juice
pack rather than from the phone itself.
If your iPhone is drained of power, the juice pack
will immediately begin charging your phone when
flipping from standby to charging mode. If your
iPhone is fully charged, the juice pack will act as your
primary battery and no power will be lost from the
iPhone internal battery until the juice pack is depleted.
Checking the status of the juice pack
To check the battery status of the juice pack, press
the status button located on the back of the device.
When pressed, the LED lights will illuminate for
several seconds. Four LEDs means that the juice
pack is fully charged. One LED means that it is almost
empty. Know before you go.
Switching your juice pack to standby mode
The switch on the back of the juice back allows you
to choose between standby mode and charging
mode. Both modes are indicated by a colored dot:
red for standby and green for charging.
7

Publicidad

loading