4. Once the engine is running, put the starter rope into the rope guide (see Fig. 14).
TO STOP THE ENGINE
As shown in Fig. 15
Release the Engine On/Off Control Bar. It will return to its initial position and the engine will automatically
switch off.
TO CLEAN A FLOODED ENGINE
NOTE: If the engine won't start after you have pulled the engine start rope several times, the engine
may be flooded with excess fuel. Use following procedure to clear and start a flooded engine.
1. Release the Engine On/Off Control Bar to stop engine.
2. Remove the spark plug, dry it, and then re-install it.
(1) Remove the spark plug cover (see Fig. 16).
Hotline: 1-866-902-9690
OPERATION
Fig.14
Fig.15
Fig. 16
15