Specification; Worthy Information - Lacor 69196 Instrucciones De Uso Y Mantenimiento

MAIN TECHNICAL SPECIFICATIONS
MODEL:
VOLTAGE:
POWER:
TEMP. RANGE:
GRILL SIZE:
MEASUREMENT:
WEIGHT:
Warranty Information
This manual provides the installation, safety and operating instructions for the electric crepe
maker. We recommend all installation, operating and safety instructions appearing in this
manual to be read before installation or operation.
The electric crepe maker is a product of extensive research and field testing. The materials used
were selected for maximum durability, attractive appearance and optimum performance. Every
unit is thoroughly inspected and tested before shipment.
IMPORTANT!
If the unit changes ownership, be sure this manual accompanies the equipment.
1.- Plug electric crepe maker into a properly grounded electrical
outlet of the correct voltage, size, and plug configuration. If the
plug and receptacle do not match, contact a qualified
electrician to determine the proper voltage and size, and install
the proper electrical outlet.
2.- To avoid any injury, turn the power switch off, unplug the unit
from the power source and allow to cool before performing
any maintenance.
3.- For safe and proper operation, the unit must be located at a
reasonable distance from combustible walls and materials.
4.- Allow a minimum of 30 cm clearance along the sides to
endure proper operation and safety.

WORTHY INFORMATION

Keep these instructions for future reference.
WARNING
!
69196
220V/50Hz
3.000W
50ºC ~ 250ºC
Ø 35 cm
45x49x22,5 cm
23 Kg
27