First Use; Sensor Function; Charging; Led Charge Level Indicator - ANSMANN HD250RS Manual De Operación

FIRST USE

The lamp is switched on/off with the on/off switch.
Press 1x: LED 100% + COB-LED 100%
Press 2x: LED 100%
Press 3x: COB-LED 100%
Press 4x: COB-LED 30%
Press 5x: OFF

SENSOR FUNCTION

The sensor mode is activated by the sensor button.
Then the LED can be switched on and off with gesture control (distance ca. 10cm).

CHARGING

Charge the lamp fully before first use. Likewise, when storing over an extended
period of time, charge beforehand and charge at least 2x per year during storage
in order to prevent the rechargeable battery pack deep-discharging.
To charge the lamp unscrew the sealing cap. Connect the Micro-USB cable with
the lamp and then with a USB charger.

LED CHARGE LEVEL INDICATOR

The lamp has a professional LED charge level indicator
If the rechargeable battery is charging, the indicator LED illuminates red. If the
rechargeable battery is fully charged, the indicator LED illuminates green.

CLEANING/MAINTENANCE

§ Clean only with a slightly damp cloth, then rub it dry.
§ Never submerge the product in water or other liquids.
§ Do not allow fluids to enter the housing.
§ Do not use hard brushes or sharp objects for cleaning.
Improper usage of the lamp may result in it being damaged
§ Do not throw or drop
§ Use only in original condition
§ Do not use while still in packaging
§ Turn off after use
Deutsch |
12
English | Français | Español | Português | Svenska
Italiano | Nederlands | Dansk | Suomi | Norsk