Hilti SBT 4­22 Manual De Instrucciones Original página 10

3 Description
3.1 Product overview
3.2 Intended use
The product described is a hand-held cordless drill / driver. It is designed for driving and removing screws,
for drilling in metal, wood and plastic.
• For this product, use only Hilti Nuron lithium-ion batteries of the B 22 series. For optimum performance,
Hilti recommends the batteries stated in the table at the end of these operating instructions for this
product.
• For these batteries, use only Hilti chargers of the type series stated in the table at the end of these
operating instructions.
3.3 Items supplied
Drill / driver, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
3.4 Status indicators of the Li­ion battery
Hilti Nuron Li-ion batteries can indicate state of charge, fault messages and the battery's state of health.
3.4.1 Indicators for state of charge and fault messages
WARNING
Risk of injury by a falling battery!
▶ If the release button is pressed with a battery inserted in the product, subsequently check that the battery
is correctly re-engaged and secure.
6 English
1
Keyless chuck
@
Torque and operating mode selector ring
;
Gear selector switch
=
Forward/reverse switch with transport lock
%
Grip
&
Installation opening for accessories
(
Battery
)
Work-area light (LED)
+
Control switch with electronic speed control
§
Battery release button
/
Battery status indicator
:
2306836
*2306836*