Cleaning And Maintenance - Peter Bausch 0375O Instrucciones Para El Uso

 Please,readandfollowtheseinstructionsofsafetybeforeusingthisappliance.
 Ourwarrantydoesn'tcoverdamagesand/orinjuriescausedbynon-observanceofthese
safetynormsandinstructions.Keepthisbookletofinstructionsinasafeplaceandadjoinitto
theapplianceiforwhenyoushouldgiveitaway.
IMPORTANTSAFEGUARDS
Danger! Never use the appliance in the bath, or near a water-filled hand-basin.
Risk of a fatal electrical shock!
• Do not let children use the equipment without supervision. Injury and electrical shock
hazard!
• Connect the adaptor exclusively to AC mains of 230 Volts ~ 50Hz. Device may ignite
spontaneously!
• For cleaning, never immerse the device in water. There's a risk of electrical shock due
to penetrated water!
• Connect the appliance exclusively to the adapter supplied with it. Risk of fire!
• Never bend or squeeze the cable, nor let it get in contact with hot things. Risk of electrical
shock due to damaged cable insulation!
• After each use unplug the adapter from the mains. Risk of fire due to over-heating of
the transformer!
• Before each use check the appliance, in case of damage of any kind avoid using it.
Injury and electrical shock hazard!
• Attention! Do not open or damage the device as well as the pedicure device by forcefully
impacts. Injury and electrical shock hazard!
STARTINGUP
I
Hold the knurled screw (1) with your hand. To remove the nut (2) use your
other hand to turn it in a clockwise direction.The attachment is inserted into
the location hole (3). To tighten the nut (2) turn in an anticlockwise direction.
Connect the appliance to the adapter (5) with the small plug (6), conforming the
II
poles (+/-). Plug in the adapter. The pilot lamp (8) indicates proper connexion to
mains. Adjust the speed of rotation:
speed 1 (3 V) and 2 (4.5 V) = slow
speed 3 (6 V) and 4 (7.5 V) = middle
speed 5 (9 V) and 6 (12 V) = fast
III
Clockwise/anticlockwise rotation: Turn on at the switch on the handle,
central position: OFF.
USEOFTHEACCESSORIES
Hands and feet can be treated a lot easier after a warm bath (with or without additives). Nails are
then more flexible, and hard skin is easier to remove.
a
Pointed abrasive tip: for shortening and shaping finger and toe-nails.
Excellent for artificial nails.
b
Cylindrical abrasive tip: to remove hard skin from fingertips, toes, heels and sole.
c
Felt polishing tip: to polish the nails prior to application of lacquer.
Using regularly this polisher will prevent nails to split or break.
d
Diamond cutter ball: for removing corns and partridge eyes.
e
Diamond cutter flame-shaped: for dealing with ingrained nails as well as for
removing the not very aesthetic cuticles around the nails.
f
Diamond cutter: for the removal of horny skin or corns and partridge eyes.
g
Diamond cutter cylinder: for shortening and shaping finger and toe-nails.
h
Abrasive thimble with arbor: for removing callosity on heel, toes and sole.
CLEANINGANDMAINTENANCE
For cleaning just wipe the manicure/pedicure appliance with a dry, soft cloth. Don't ever put
the set in water or use detergents. Except for the polishing felt and the brush, you can use water,
soap and a brush to clean the other accessories. After the cleaning it is advisable to spray on some
disinfectant. Let the tips dry in order to avoid rusting. The set needs no maintenance, just take
good care of it.
REPAIRS
Caution! Electrical appliances should only be repaired by qualified technicians, as otherwise
serious damage may be caused.
WASTEDISPOSAL
At the end of its working life the appliance must not be disposed of as urban waste. It must
be taken to a special local authority differential waste collection centre for electrical and
electronic products.