Filling The Water Tank; Temperature Settings - Team kalorik TKG SI 11 Manual De Instrucciones

Fax +32 2 359 95 50

FILLING THE WATER TANK

Use preferably demineralised water. If you want to use the steam dial, fill the water tank as
follows:
1) Unplug the iron from the outlet to let it cool down and set it horizontally on a stable level
surface.
2) Turn the temperature dial to "MIN" and variable steam dial to the 0 setting.
3) To fill the water tank, open the lid of the filling opening downwards and pour water
through the fill opening using a measuring cup. Never exceed the MAX mark indicated on
the appliance.
4) When ironing, unplug the appliance before refilling. Fill the water tank by holding the
appliance in horizontal position without putting down the hot soleplate, unless you have a
heat-resistant base.

TEMPERATURE SETTINGS

• You can choose the temperature setting in function with the cloth to iron.
• In order to turn the iron on, please turn the temperature knob clockwise into the required
position (see table below). If you are in doubt, take a look at the garment label.
DRY PRESSING
• Turn the variable steam dial on position 0.
• Plug in the iron.
• Set temperature dial for the desired fabric. Always check the label of the garment before
choosing the temperature setting.
• Set iron on heel rest and wait until the temperature indicator light goes out.
STEAM PRESSING
Kind of textile
Synthetic (e.g. acetate,
acrylic, viscose, Polyamide,
polyester, ....)
Silk
Wool
Cotton
Linen
Care and cleaning
• Fill the water tank (variable steam dial on 0 position).
• Put the plug of the appliance into the power socket.
• Turn the temperature dial clockwise into the required position.
• Turn variable steam dial between 0 and
a larger amount of steam.
• Set the iron on its heel and wait until the temperature indicator goes out.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don't change the page numbering. Keep the
language integrity.
Temperature dial
MIN
|
|
|
|
|
|
MAX
|
|
for minimum steam or to the
9
Assembly page 9/40
Steam ironing
0
----->
position for
TKG SI 11 - 091012