Publicidad
Idiomas disponibles
Idiomas disponibles
Step 10
With the assistance of another person, locate and
mark the screws in the wall that the cabinet will be
mounted to. Mark the loca! on of the screws with a
pencil. Posi! on the wall hanger (11) on the wall and
mark the loca! ons of the screws on the back rail.
Drill three
6mm holes in the wall hanger (11) at
Ø
the screw loca! ons. Using a level, insert three wall
anchor (TUD0055) into wall, press in using hammer
(hammer not provided) & a" ach the wall hanger
(11) to the wall with three screws (TUD0063) as
shown. It is important that the wall hanger is
mounted to a minimum of at least three screw.
ameriwoodhome.com
x3
x3
TUD0063
TUD0055
11
hole
hole
hole
17
WALL
* raw edges are shaded
Publicidad
