Product Description - Concept TITAN CARE Manual Del Usuario

EN

PRODUCT DESCRIPTION

1 Main part
2 On/Off switch
3 Operation indicator
4 Lever of curling pliers
5 Curling pliers
6 Tip of pliers
7 Stand
8 Hanging loop
8
OPERATING INSTRUCTIONS
Do not use the appliance to treat wigs or animals.
1. Gently dry your hair with a towel after washing.
2. Do not use hair spray or other flammable substances.
3. Unfold the power cord completely. Connect the appliance plug to the mains.
4. Switch on the appliance using the On/Off switch (2). The operation indicator (3) flashes during warm-up and lights
continuously after warm-up.
5. If you put the appliance down during use, always switch it off.
6. Switch off the appliance after use.
7. If you use the appliance in the bathroom, be sure to switch it off and unplug it immediately after use, as the proximity
of water and the appliance's contact with water is very dangerous, even when the appliance is turned off!
8. The hanging loop is used for hanging the appliance during storage.
Using the appliance to curl hair
1. Hold the appliance according to Fig. 1. For easier handling, you can also use the other hand to hold the appliance
by the cold tip of the pliers (6). Press the lever (4) to open the curling pliers (5).
2. Clamp the prepared lock of hair into the curling pliers and turn it from the tip to form a curl (Fig. 4). The thinner the
hair lock, the firmer the curls you create.
3. After turning the hair into a curl, wait 10-15 seconds to fix the shape of the hair.
4. Unwind the lock of hair (Fig. 5), open the curling pliers (5) by pressing the lever (4) and remove the formed lock of
hair from the curling pliers.
5. Repeat the procedure for other hair locks.
36
2
3
1
7
5
4
6
KK1180