Maintenance And Storage; Troubleshooting - Imetec S0201 Manual De Instrucciones

NOTE: when a new usage time is selected, the countdown will restart from zero.
NOTE: If during use the power supply to the fan heater should be accidentally
interrupted, when it is switched on again the product will maintain the temperature
but timer settings shall have to be restored manually.
WARNING! Always disconnect the appliance from the mains supply
before cleaning or performing maintenance.
The fan heater may be cleaned using a soft, slightly damp cloth. Dry well after cleaning.
WARNING! Once you have finished using this appliance, make
sure it has cooled down completely before putting it away.
Keep the fan heater in a cool, dry place, out of reach of children.
NOTE: When you put the fan heater away, make sure it is well-protected from
dust.
In the event that one the following problem should occur, adopt the proposed solution.
Problem
The product emanates a "burnt"
smell
The product does not work

MAINTENANCE AND STORAGE

TROUBLESHOOTING

Check for the presence of any dust residues
and proceed with cleaning as indicated in the
MAINTENANCE AND STORAGE chapter
Make sure that the thermostat (8) is not positioned on
the minimum temperature / antifreeze position (where
present)
Solution
EN
15