Marmitek CONNECT 411 Modo De Empleo página 4

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 21
ADVANTAGES
Connect411
• S uitable for simultaneously connecting 4 HDMI sources like set-top boxes, Blu Ray players
and game consoles to every HDTV or projector. You only need 1 HDMI input on your TV
and you never have to switch cables again.
• S upports all HDTV resolutions up to 1080p and 8 channels digital audio for 7.1 surround
sound.
• W ith digital audio output for your home cinema set which supports codec formats like
Dolby True HD and DTS-HD Master Audio.
• W ith built-in repeater and equalizer for correcting any possible loss of signal, so you can
connect up to 15 metres of HDMI cable to the output.
• H igh quality 24K Gold Plated HDMI connectors to prevent transmitting- and corrosion
resistance.
• Free of interference because of the solid metal casing.
• Remote control included.
• This switcher can be stored invisibly using the optional IR receiver.
• Controllable via RS232 serial port.
• Meets the HDCP standards (High-bandwidth Digital Content Protection)
HDMI V1.3
• V ideo bandwidth 225 MHz (makes image reproduction of 1080p, 12-bit and 60Hz
possible)
• D eep Color 12-bit (billions instead of millions colours, better reproduction of subtle
differences in gradation and a higher contrast ratio)
• Dolby TrueHD & DTS HD Master Audio (high quality audio support)
• Lip-Sync (prevents synchronisation problems between image and sound)
• CEC (operate multiple 'CEC' devices with just one remote control).
INSTALLATION
1. C onnect the HDMI cable to your screen (TV, monitor of projector) with the "HDMI
output" of the Connect411.
2. Connect the HDMI cables from your sources to the "HDMI inputs" of the Connect411.
3. C onnect the digital audio out to a digital audio receiver (for instance a home cinema set)
using a coaxial digital audio cable (not included).
4. If desired, connect the RS232 cable (not included), see page 38 for more information.
5. C onnect the power adaptor to the power connector of the Connect411 and connect to
the mains.
Remark: Use only category 2 HDMI certified cables for the best quality in image and sound.
4
© MARMITEK

Publicidad

Tabla de contenido
loading

Tabla de contenido