Gardena EasyCut Li-18/23 Instrucciones De Empleo página 7

z
Setting the trimmer to body
height:
h
o
1
t
Adjusting the plant guard:
Starting the trimmer:
p
a
18
All manuals and user guides at all-guides.com
Working position 1:
For standard trimming.
Working position 2:
1. Press the foot pedal
desired working position.
2. Release the foot pedal
CAUTION! Avoid contact between the ground and the trimmer
head in working position 1 + 2.
Setting the shaft length:
v Loosen the clamping sleeve
desired shaft length and re-tighten the threaded collar
The clamping sleeve
prevent the shaft from being moved.
Setting the additional handle:
v Pull the lock belonging to the additional handle
o
set the additional handle
release the lock
If the trimmer is correctly set to the body height, the posture
is upright and the trimmer head in working position 1 is tilted
forwards slightly.
v Hold the trimmer by the handle
such a manner that the trimmer head is tilted forwards slightly.
ö
Working position
v Turn plant guard
until it locks into place.
Switching the trimmer on:
1. Press and hold the safety lock
button on the handle.
a
2. Release the safety lock
Switching the trimmer off:
v Release the start button
and lower the shaft downwards into the
z
and allow the shaft to engage.
z
, extend the handle
t
must be fastened firmly enough to
t
to the desired incline and
h
.
o
and additional handle
1
ö
Parking position
through 90° into the required position
ö
and then press the start
p
again.
p
on the handle.
a
to the
1
.
t
,
h
in
h