Descargar Imprimir esta página

PRO LIFTS VMB TE-064 Manual De Instrucciones página 8

Torre elevadora

Publicidad

Idiomas disponibles

Idiomas disponibles

O R I G I N A L
4. USER INSTRUCTIONS.
4.1 -
swivel wheels (T).
4.2 - Remove the legs from their trans-
port supports (S) and fully insert them into
that the lift is in vertical position using the
spirit level (L
the stabilizer (Q), turning the handle (H)
if necesary.
4.3 - THE MAXIMUM LOAD IS 125 Kg
(275 lb). The lift should NEVER be over-
the most important issue. Untighten the
B) and place the load onto
the lift using an adequate support accor-
ding to the need, use so that the weight of
the load will only be elevated in a vertical
direction. The minimum load is 25 Kg.
4.4 - Elevation:
1
N
) to lift the tower, the red
ensuring that the load will never fall.
4.5 - Blocking: Once the system is eleva-
ted to its required height, gently turn the
PRO LIFTS S.L.
3.17 - Only original replacement parts should be used.
V
R
-
Depósito legal y copyright. Todos los derechos reservados.
ENGLISH
and release strain applied on the cable.
Security system ALS
The TE-064 incorporates the patented
Security). This VMB red trigger system
tion it is left in. Each section of lift has an
4.6 - Lowering: To bring the lift down you
1
N
) and at the same time pull
the red ALS-1
2
N
the ALS-1
has been completely lowered. All red ALS
one.
CAUTION
When two towers are used to elevate a
bridge, down truss or many towers to ele-
vate a structure of any type, it is almost
2
N
) direction
), whilst maintaining
-
-
8

Publicidad

loading